Table of Contents
Advertisement
• Keep the battery out of reach of children.
• Dispose of used batteries according to local regulations.
5.2.2 Maintaining the LCD Display
• Do not scratch the surface of the screen with any hard objects.
• Do not spray liquid directly on the screen or allow excess liquid to drip down inside
the device.
• Do not place anything, such as food and drink, on the screen at any time to prevent
damage to the screen.
• Clean the LCD display only with a soft cloth dampened in the cleaning solutions
each time after use.
5.2.3 Cleaning the MIT-W102
1. Turn off the MIT-W102 and unplug the power cord.
2. Wipe the screen and exterior with a soft, damp cloth moistened in the cleaning
solutioins. Do not use liquid or aerosol cleaners on the screen, as these will discolor
the finish and damage the screen.
5.3 Trouble Shooting
When System behaves abnormally, such as
1.
Failure to power on.
2.
Failure to power off.
3.
Power on LED off but DC power plug in.
4.
Any other LEDs ON but system cannot work.
Contact your distributer, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before you call:
Product name and serial number.
Descriptions of your peripheral attachments.
Descriptions of your software (operating system, version, application software,
etc.)
A complete description of the problem.
The exact wording of any error messages.
43
Advertisement
Table of Contents
