Table of Contents
Advertisement
Pre-installation
2.3
Scope of delivery
1
2
3
Fig. 56 Scope of delivery
[1]
Unit CS3000 AWP
[2]
Power transformer for HMI
[3]
Temperature probe
[4]
Additional probe trap (15m)
[5]
Probe Taf1 (10m)
3
Pre-installation
3.1
Moving and storage
Reception
It is important to check before accepting the delivery:
• If the unit hasn't been damaged during the transport;
• If the materials delivered correspond with that indicated on the
transport document, comparing the data with the identification label
positioned on the packaging.
In case of damage or anomaly identified:
• Write down on the transport document the damage found and quote
this sentence: "Conditional acceptance clear evidence of
deficiencies/damages during transport".
• Contact the supplier and the carrier through registered mail with
advice of receipt.
Any disputes must be made within 8 days from the date of the delivery.
Complaints after this period are invalid.
Storage
Respect the indications on the outside of the packaging, in particular:
• Minimum ambient temperature: - 30ºC (possible components
damages);
46
4
5
0010045469-001
• Maximum ambient temperature: +48ºC (possible safety valve
opening);
• Maximum relative humidity: 95% (possible damages to electrical
components).
Any disputes must be made within 8 days from the date of the delivery.
Complaints after this period are invalid.
Removal of packaging
When removing the packaging, be careful not to damage the unit.
Recycle and dispose the packaging material in compliance with local
regulations.
Fig. 57 Use of the forklift
CS AWP 16-24
CS AWP 31-41
1
630
640
2
200
200
Table 43 Dimensions in mm- use of the forklift
Fig. 58
CS AWP 53-59
unit on pallet
Table 44
1
2
0010045064-001
0010045065-001
CS3000 AWP – 6721852570 (2023/04)
Advertisement
Table of Contents
