M S-6470 Barebone
Overview
The built-in mainboard (MS-7407) is designed for Hetis G31 Series (MS-6470) barebone
only. Except the mainboard, the built-in components of the barebone include power
supply. In this chapter, we will show you how to install CPU, CPU Cooler, Memory
Modules, Card Reader, Hard Disk Drive (HDD) and Optical Disk Drive (ODD).
Installation Tools
Cross type s crewdriv er, c an be used to do mos t of the
installation. Choose one with a magnetic head would be better.
Pliers, can be used as an auxiliary tool to connect some con-
nectors or cables.
Forceps, can be used to pick up tiny screws or set up the
jumpers.
Rubber gloves, can prevent yourself from being incised and
suffering the static charge.
Installation Screws
Two types of screws are used in assembling the barebone: Round-headed screw
and thumb screw.
Round-headed screw: This type of screw is used to attach
the HDD and Card Reader to the tray.
3-2
This manual downloaded from http://www.manualowl.com