Table of Contents
Advertisement
4.4.3.3.
IO system assignment to Synchronous Cycle Interrupts
HW Config. window. Double-click on CPU main module. In „Properties" window, tab
Open Step7
®
„Synchronous Cycle Interrupts", PROFINET string „IO System No. 100" is assigned to Synchronous Cycle
Interrupt OB61.
A click on button „Details" provides OB61 properties. Process image partition 1 is assigned to OB61.
The application cycle is selected in the view below.
Baumer_EAx_PROFINET_EN_202210_MNL.docx
23/74
www.baumer.com
10.22
Advertisement
Table of Contents
