DFI-ITOX EL332-IP User Manual page 86

3
BIOS Setup
Change User Password
This field is used to set or change the user password.
To set a new password:
1. Select the Change User Password field then press <Enter>.
2. Type your password in the dialog box then press <Enter>. You are limited to
six letters/numbers.
3. Press <Enter> to confirm the new password.
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
After you have set the user password, the Clear User Password and Password
Check fields will appear.
Clear User Password
To clear the password, select Clear User Password then press <Enter>. The Pass-
word Uninstalled dialog box will appear.
Password Check
Setup
The BIOS checks for the user password whenever accessing the Setup utility.
Always
The BIOS checks for the user password when accessing the Setup utility and
booting the system.
Boot Sector Virus Protection
Enables or disables the boot sector virus protection function.
86