Jumper Settings; Clear Cmos Data - DFI-ITOX EL332-IP User Manual

2
Hardware Installation

Jumper Settings

Clear CMOS Data

1 2 3
1 2 3
JP6
2-3 On:
1-2 On: Normal
Clear CMOS Data
(default)
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP6 pins 2 and 3 to On. Wait for a few seconds and set JP1 back to its
default setting, pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
24