DFI-ITOX EL332-IP User Manual page 40

2
Hardware Installation
Wake-On-PS/2 Keyboard/Mouse
The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 key-
board or PS/2 mouse to power-on the system. To use this function:
• Jumper Setting
JP2 must be set to "2-3 On: 5V_standby". Refer to "PS/2 Power Select" in
this chapter for more information.
Important:
The 5V_standby power source of your power supply must support
≥720mA.
40