Yearly Checks; Abs Plastic Shrouds; Axle Bearings And The Motor/Transaxle Assembly; Console, Charger, And Rear Electronics - ONE Limosa Owner's Manual

• Check for extreme wear on the anti-tip wheels. Replace them as
necessary.
• Check for tire wear. See your authorized provider for repair.
• Keep your Mobility Scooter clean and free of foreign material, such as
mud, dirt, hair, food, drink, etc.

10.10 Yearly Checks

Take your Mobility Scooter to your authorized provider for yearly
maintenance, especially if you use your Mobility Scooter on a daily basis. This
helps ensure that your Mobility Scooter is functioning properly and helps
prevent future complications.

10.11 ABS Plastic Shrouds

If your Mobility Scooter has a body shroud with a glossy nish, the body
shroud has been sprayed with a clear sealant coating. You can apply a light
coat of car wax to help it retain its high-gloss appearance. If your Mobility
Scooter has a body shroud with a matte nish, use ONLY products developed
for matte- nish paint. Do not use wax, detail spray, ArmorAll®, or any product
made for a glossy paint.

10.12 Axle Bearings and The Motor/Transaxle Assembly

These items are all pre-lubricated, sealed, and require no subsequent
lubrication.

10.13 Console, Charger, and Rear Electronics

Keep these areas free of moisture. Allow these areas to dry thoroughly if they
have been exposed to moisture before operating your Mobility Scooter again.

10.14 Nylon Lock Nut Replacement

Any nylon insert lock nut removed during the periodic maintenance,
assembly, or disassembly of the Mobility Scooter must be replaced with a
new nut. Nylon insert lock nuts should not be reused as it may cause damage
to the nylon insert, resulting in a less secure t. Replacement nylon insert lock
nuts are available at local hardware stores or through your authorized
provider.
37
ver 2023.01.03E
Mobility Scooter
OWNER'S MANUAL