Table of Contents
Advertisement
10.5 Battery Terminal Connections
Make certain that the terminal connections remain tight and are not corroded.
10.6 Wiring Harnesses
•
Regularly check all wiring connections.
•
Regularly check all wiring insulation, including the charger power cord,
for wear or damage.
•
Have your authorized Provider repair or replace any damaged connector,
connection, or insulation that you nd before using your Mobility Scooter
again.
10.7 Daily Checks
With the power turned o , check the throttle. Make sure it is not bent or
damaged and that it returns to the neutral position when you release it. Do
not try to repair it. See your authorized provider if there is a problem.
Visually inspect the tiller cable. Make sure that it is not frayed, cut, or has any
wires exposed. See your authorized provider if there is a problem.
Check for at spots on solid tires. Flat spots could adversely a ect stability.
Inspect the armrests for loose hardware, stress points, or damage. See your
authorized provider if there is a problem.
Check the brakes. This test should be carried out on a level surface with at least
3 feet (1 meter) of clearance around your scooter.
10.8 Weekly Checks
Inspect the controller and charger connectors for corrosion. Contact your
authorized provider if necessary.
Check for proper tire in ation if equipped with pneumatic tires. If a tire does
not hold air, contact your authorized provider for replacement of the tube.
10.9 Monthly Checks
•
Check that the anti-tip wheels do not rub the ground when you operate
the Mobility Scooter.
36
ver 2023.01.03E
Mobility Scooter
OWNER'S MANUAL
Advertisement
Table of Contents
