Table of Contents
Advertisement
8. Basic Troubleshooting
Flash Description
1
2
3
30
ver 2023.01.03E
WARNING – If the battery symbol light is ashing on the
battery gauge then the scooter has detected a fault. In this
happens, follow the procedure below:
1.
Release the drive control lever, then switch the scooter
o and on. If this does not clear the fault then proceed to
step 2 below.
2.
Switch the scooter o and recharge the battery fully. If
this does not clear the fault then proceed to step 3
below.
3.
Count the number of ashes. The symbol will ash a
number of times before a long pause. Count the number
of ashes between pauses and report this to your dealer.
The ash error codes are listed below for reference.
Battery Low
Low Battery Fault
High Battery Fault
Mobility Scooter
OWNER'S MANUAL
Meaning
The batteries are running low.
• Recharge the batteries.
The batteries have run out of charge.
Recharge the batteries.
Check the battery and associated
connections and wiring.
Battery voltage is too high. This may
occur if overcharged &/or travelling
down a long slope.
If travelling down a slope, reduce your
speed to minimize the amount of
regenerative charging.
Advertisement
Table of Contents
