Table of Contents
Advertisement
3-Thread Overlock – Narrow
It's easy to convert your Victory to serge with 3 threads by
simply eliminating the left needle.
To convert to narrow 3-thread overlock (3.0-5.0mm), cut the
left needle thread. (fig. A) Remove the left needle and left
needle thread completely from the machine.
Tighten the needle clamp screw slightly to prevent the screw
from working out. (fig. B)
Place needle into right needle clamp position and tighten
screw.
Move the stitch selector lever to "B".
For the right needle, 3-thread narrow overlock stitch, follow
the suggested settings and the threading diagram below.
NEEDLES
LENGTH
right
2.5-3.5
A A
B B
STITCH
WIDTH
SELECTOR
3.0
B
3
T
H
R
E
A
D
O
V
E
R
L
O
C
K
23
Advertisement
Table of Contents
