Returning To 3 Or 4-Thread Overlock - Baby Lock Victory BLS3 Instruction And Reference Manual

Returning to 3 or 4-Thread Overlock

1. Open the front cover and rotate the handwheel counterclockwise to bring the needle clamp to
its highest position.
2. Slide the subsidiary looper to the left direction and swing it clockwise to the right.
3. Engage the machine to the looper threading position. ( fig. A-B page 15)
4. Rethread the upper looper (page 16). For 4-thread serging, replace the second needle. (page
17)
5. Move the lock button release lever to the right, to unlock the machine.
6. Turn the handwheel and line up the green marks on the machine and the handwheel.
7. Rethread the needle(s). (page 18)
8. Close the blade cover and the front cover.
9. Lower the foot and sew a test stitch.
1
2
2
F
A
D
E
N
O
V
E
R
L
O
C
K
35