Table of Contents Overview …………………………………………… 02 Button Control ………………………………… 03 Charging …………………………………………… 04 Turning On ………………………………………… 05 Initial Setup Using the MACH Vacuum Cleaner 06 Add Water and Floor Cleaner Start / Stop cleaning LCD Screen Guide …………………………… 09 Selecting a Cleaning Mode ………… 10 Using the Trigger ……………………………...
Overview Self-cleaning button Mode button Power button Handle bar Floor cleaner switch LCD display screen Trigger Rubber cover Floor cleaner tank Rubber cover Clean water tank High-performance filter Dirty water tank Rolling brush cover Multi-surface rolling brush (Not suitable for use on high-pile rugs) Removable cover Charging base...
Button Control Action Function Press and hold the power button for • Turn on or off 1 second • During cleaning, pause or resume current task Press the power button • During menu setting, skip to the previous menu option Press and hold the mode button for •...
Charging Before first use, fully charge the MACH Vacuum Cleaner for 4 hours. Wrap your power cable as needed and keep your cable organized. Connect the power cord to a power outlet. Place the MACH Vacuum Cleaner onto the charging base. •...
For first-time use, the boot animation will guide you to learn the basic operations, select a voice prompt language, scan the QR code to download the eufy Clean app, and complete the Wi-Fi connection. • To better understand the operation and maintenance of this device, and obtain the latest product services and information, please scan the QR code to download the eufy Clean app.
Using the MACH Vacuum Cleaner Add Water and Floor Cleaner Add Clean Water Click Remove the clean water tank from the MACH Vacuum Cleaner. Open the rubber cover. Add tap water until it reaches the MAX water line. • Do not use mineral or purified water. Replace the clean water tank.
Page 8
• Do not add hot water above 50 degrees, alcohol and corrosive liquid into the water tank. • Use the floor cleaner designated by eufy only. Use with any other cleaner may cause severe damage to the MACH Vacuum Cleaner.
Start / Stop cleaning • The MACH Vacuum Cleaner cannot clean high-pile rugs more than 1cm in height. • Do not clean carpets which are made of materials including wool or other animal furs. • It is recommended to clean your carpets in suction mode. After Wi-Fi setup, start cleaning in the smart mode by default.
LCD Screen Guide The LCD screen will show you the working status of the MACH Vacuum Cleaner. Shows current volume level of voice prompts (High / Low / Mute) Shows the animation of current work mode Lights up when floor cleaner switch is turned on Shows current charging status / battery level Shows current mode name when switching work modes Lights up when operating the device under maximum power condition...
Selecting a Cleaning Mode During cleaning, press the mode button to select a cleaning mode. • You will hear the corresponding voice prompt when a mode is selected. Mode Smart mode (default) For daily mopping and hard floor washing Suction mode Ideal for carpet cleaning or soaking up dry / liquid waste on the floor Using the Trigger •...
• Reset the Wi-Fi connection: The Wi-Fi connection may be interrupted due to network change. In this case, reset the Wi-Fi connection, re-add the device via the eufy Clean app, and complete the Wi-Fi setup. • View the basic information of the MACH Vacuum Cleaner.
• To turn off the red warning lights, follow the on-screen instructions to start self-cleaning or clean the dirty water tank. • You can also turn off the red lights via the eufy Clean app. Turning Voice Prompts On or Off Press and hold the self-cleaning button for 2 seconds to turn the voice prompts on or off.
Maintenance Self-Cleaning and Self-Drying • Make sure you have filled more than half of the clean water tank before self-cleaning. • To avoid any damage to the mopping head of the MACH Vacuum Cleaner, do not rinse or soak it in water.
Drying of the Rolling Brush If only the rolling brush needs to be dried, hold the trigger for 2 seconds when the MACH Vacuum Cleaner is on the charging base. • The device begins drying of the rolling brush. Clean the Dirty Water Tank Click Remove the dirty water tank.
Clean the Rolling Brush Manually The multi-surface rolling brush can be cleaned automatically through self-cleaning, but some foreign substances, such as hair, can easily get tangled in the rolling brush, so it is best to clean the rolling brush manually if it occurs. •...
Clean the High-Performance Filter It is recommended to clean the filter once a week. Remove the dirty water tank. Remove the high-performance filter. Rinse the filter and dry it completely before next use. Clean the Removable Cover It is recommended to clean the cover once a week. Remove the cover.
Troubleshooting MACH Vacuum Cleaner is not working normally: • Make sure the battery is fully charged. • Make sure the handle bar has been pushed backward and you have heard a click before use. • Check if the rolling brush is stuck. Suction power is decreased or there is a loud noise: •...
Customer Service For tutorial videos, FAQs, manuals, and more information, please visit: https://support.eufylife.com Warranty: 24-month limited warranty Contact Us support@eufylife.com www.eufylife.com (US/CA) +1 (800) 994 3056 (UK) +44 (0) 1604 936200 (DE) +49 (0) 69 9579 7960 (日本) 03 4455 7823 For more support phone numbers, please visit: Scan this QR code to get the online user manuals in other languages.
Need help?
Do you have a question about the MACH V1 and is the answer not in the manual?
Questions and answers