Advertisement
Quick Links
Description
This devices features a PIR and US (ultrasound) movement detector, and a brightness
sensor for automatic activation of various types of loads following the detection of a
movement, and a brightness level lower than the set level.
The enabling/disabling of the load can also be performed manually using the
appropriate front pushbutton and/or using an external BUS control device.
IT is possible to con gure several operating modes; for the detailed descriptions see
page 4.
Standards, Certi cations, Marks
Directive:
– Electromagnetic Compatibility Directive 2004/108/EC
Installation regulations:
– CEI 64-8
Product regulations:
– IEC 60669-2-1
– EN 50428
Environmental regulations:
– EU Directive 2002/96/EC: WEEE (Waste Electrical and Electronic Equipment)
– EU Directive 2002/95/EC: RoHS (Restriction of Hazardous Substances)
Dimensional data
Size:
A
B
A
45
Technical data
Voltage:
Current draw:
Connection between sensor and actuator:
Sensor type:
Flush mounted box depth:
Weight:
Impact resistance:
Penetration of solids and liquids:
Time delay:
Brightness:
Operating temperature:
Storage temperature:
2 ush mounted modules
C
B
C
45
51
27 V=
17 mA
SCS BUS connector
movement detector (PIR+US) with 180°
detection angle and brightness sensor.
40 mm
60 g
IK04
IP20
from 5 sec to 59 min. 59 sec
from 20 lux to 1275 lux
from - 5 °C to + 45 °C
from - 20 °C to + 70 °C
574048
067226 HD/HC/HS4658
574098 AM5658
Front view
5
Legend
PIR sensor
1.
LEARN LED
2.
US sensor
3.
ON-OFF button
4.
LEARN button
5.
Movement detector sensor (under the lens)
6.
Infrared transmitter (under the lens)
7.
Brightness sensor
8.
L/N/NT4658N
8
7
6
1
2
3
4
Advertisement
Related Manuals for LEGRAND HS4658
Summary of Contents for LEGRAND HS4658
- Page 1 574048 067226 HD/HC/HS4658 574098 AM5658 L/N/NT4658N Description Front view This devices features a PIR and US (ultrasound) movement detector, and a brightness sensor for automatic activation of various types of loads following the detection of a movement, and a brightness level lower than the set level.
-
Page 2: Installation
574048 067226 HD/HC/HS4658 574098 AM5658 L/N/NT4658N Installation Positioning the sensor Position the sensor so that it is not a ected by the arti cial light already 2,5 m present in the room. ≥ 2,5 m Settings Sensor parameters Default value... - Page 3 574048 067226 HD/HC/HS4658 574098 AM5658 L/N/NT4658N If a movement is detected for a time of less than 20 s, the sensor will decrease Advanced mode: the set time delay to 3 minutes. If the set delay time set is already less than three Calibration minutes, it will remain as such.
-
Page 4: Con Guration
574048 067226 HD/HC/HS4658 574098 AM5658 L/N/NT4658N Con guration 1. Lighting Management System When installed in a Lighting Management system, the device can be con gured in the - Push & Learn: procedure for pairing di erent connected devices or changing the assign- following ways: ments de ned automatically in the Plug &... -
Page 5: Maintenance
574048 067226 HD/HC/HS4658 574098 AM5658 L/N/NT4658N 1) Duration of the lights timer depending on the con gurator on T: 2) Sensitivity of the PIR movement detector depending on the con gurator on S: Con gurator on T Lights timer in minutes...