Page 1
Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product. https: STAND- / /vivo us.com/pr Desk M o ducts/stand v101 Tools Requir Desk M e d: STAND- phillips screwdriver...
Page 2
Assembly Steps Steps Step 2 (Continued) Step 1 Option B: STAND- Gr Desk M o mmet Base Installation Attach pole cap (M) to top of pole (D). For grommet hole mounting, remove screw in top of bolt on clamp (C). Stick soft pads (G) to bottom of grommet base (F). Attach grommet plate (I) to bolt and run through grommet hole into grommet base (F) and thread into pole (D) as shown in diagram.
Page 3
Step 6 Step 4 Adjust tension in monitor bracket with 6mm allen key (L). Option A: STAND- Flat Back Mount Monitor Desk M Attach VESA plate (A) to monitor using bolts (M-A) or (M-C) and washers (M-E). Option B: STAND- Cur Desk M v ed Back Mount Monitor Desk M Attach VESA plate (A) to monitor using bolts (M-B) or (M-D), washers (M-E), and spacers (M-F).
Page 4
If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. +45° 360 ° -45° For more VIVO products, check out our website at www.vivo-us.com. Last updated: 05/22/18...
Need help?
Do you have a question about the STAND V101 and is the answer not in the manual?
Questions and answers