Page 1
Scan the QR code with your mobile device or follow the link to helpful videos and specifications related to this product. https: STAND- / /vivo us.com/pr Desk M o ducts/stand v001b Tools Requir Desk M e d: STAND- phillips screwdriver...
Page 2
Assembly Steps Steps Step 2: STAND- Install the Monitor Desk M to the VESA Mount Step 1: STAND- Install the Pole to the Desk Mount t op Install two screws (M-A or M-B) with washers (M-C) in top 2 holes of monitor, leaving Option A: STAND- Desk Mount Clamp Installation Install Bottom 3mm of thread exposed.
Page 3
Step 3: STAND- Cable Management (Continued) Step 3: STAND- Cable Management Replace covers making sure the cables have enough slack to allow free movement of Remove cable covers from upper and lower arms. To remove lower cover, remove the arm. If using clamp option, use cover (D) for additional cable management. the screw as shown, pull slightly forward, up and off.
Page 4
Call: 1-800-371-5654 If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. For more VIVO products, check out our website at www.vivo-us.com. Last updated: 05/21/18...
Need help?
Do you have a question about the STAND V001B and is the answer not in the manual?
Questions and answers