Advertisement
Quick Links
Advertisement
Related Manuals for Fein Optic FZ12
Summary of Contents for Fein Optic FZ12
- Page 1 FZ12 Microscope User’s Manual Fein info@feinoptic.com...
- Page 2 FZ12 Microscope Components FZ12-BFDF Beam Splitter Zoom Knob Coarse Focusing Knob Aperture Diaphragm Adjusting Knob Fine Focusing Tension Adjustment Knob Knob Main Objective BF/DF Reflector Knob Fein...
- Page 3 FZ12 Microscope Components FZ12-BFDF Trinocular Head Eyepieces Focus Holder Microscope Body Lock Knob Stage Plate Stage Clips Fein...
- Page 4 FZ12 Microscope Components FZ12-ILB Trinocular Head Eyepieces Focus Holder Aperture Diaphragm Coarse Adjusting Knob Focusing Knob Fine Focusing Knob LCD Display Intensity and Color Temperature Color Temperature Stage Clips Control Fein...
- Page 5 FZ12 Microscope Components FZ12-ILB Microscope Head Zoom Knob Click Stop Main Objective Rheostat Control Ultra Thin base Power On/Off Fein...
- Page 6 FZ12 Microscope Assembly Fein...
- Page 7 FZ12 Microscope Assembly Assemble the Focusing Bracket Loosen the lock knob (1) of the focusing bracket group. Insert the hole (2) of focusing bracket group into the column (3), until the focusing bracket group is in the lowest position. Then tighten the lock knob (1) to prevent the microscope from turning.
- Page 8 FZ12 Microscope Assembly Assemble the Microscope Head Loosen the head set screw (1) fully with a M4 inner hexagon Allen key. With the microscope head facing forward, insert the bottom of the microscope head into the top hole of the microscope body matching the orientation groove (2) with the orientation pin (3) of the body.
- Page 9 FZ12 Microscope Assembly Assemble the Stage Clips Insert the stage clips (1) into the two holes on the base of the microscope (2). Adjust the Microscope Body Position Loosen the lock knob (1) and rotate the microscope body and the focusing bracket left and right.
-
Page 10: Before Use
Before Use: Do no shake or drop the microscope Do not expose the microscope to direct sun, high temperatures, dust, or damp environments. Use a flat work surface. Indoor operating temp 32°- 104°F (0°- 40°C), max relative humidity of 85%. When moving the microscope use both hands, holding by the base and the back of the microscope. - Page 11 FZ12 Microscope Operation: Set Illumination: Plug in the LED light source and turn on the main power switch to “ON”. Adjust the illumination intensity knob (2) until the illumination is comfortable for observation. Rotate the knob clockwise to increase the brightness and rotate counterclockwise to reduce the brightness.
- Page 12 FZ12 Microscope Operation: Right diopter Left diopter adjusting ring adjusting ring Adjusting Diopters: Turn the zoom knob to maximum magnification. Adjust both diopter adjustment rings to zero. Look through the right eyepiece. If the image is not clear, turn the focusing knob until it is clear. Turn the zoom knob to minimum magnification.
- Page 13 FZ12 Microscope Operation: Engage Detents: Detents are stop positions at every zoom magnification value. When the detents are engaged, there will be a “click” when the zoom has been positioned in a zoom magnification. Detents are ideal when the application requires accurate repeatability.
- Page 14 FZ12 Microscope Operation: Selecting the Light Path: When the beam splitter pole (1) is in the innermost position, the light is directed to the binocular head for observation through the eyepieces. When the beam splitter pole is in the outermost position, the light is directed to the trinocular tube which is used for observation using a camera.
- Page 15 FZ12 Microscope Trouble Shooting TROUBLE POSSIBLE CAUSE SOLUTION Power cord is not plugged in. Plug in power cord. Bulb does not turn on. Power switch is not turned on. Turn on power switch. Bulb turns on, but field Increase light intensity by Rheostat is too low.