Table of Contents
Advertisement
Adjusting the Product Tilt and Height
― The colour and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
-3.0° (±2.0°) ~ +22.0° (±2.0°)
•
The product tilt and height can be adjusted.
•
Hold the top centre of the product and adjust the height carefully.
•
The height adjustment has a certain tolerance. Stay within the tolerances when adjusting the height
of the product.
0 ~ 120.0 mm (±5.0 mm)
Caution
•
Grasp the left and right sides of the monitor and adjust the swivel.
•
Grasp the centre of the monitor and adjust the height.
•
Do NOT hold the stand moving part with your hand when leveling the screen. Your hand may get
hurt.
After adjusting the product tilt and height, if the screen is not level, take the following actions.
•
Hold the bezel at both side edges and adjust the monitor angle until the screen becomes level. (Be
careful not to directly hold the LCD display.)
•
The monitor angle can be adjusted from -1° to +1°.
11
Advertisement
Table of Contents
