Table of Contents
Advertisement
Checking the space around the product
Make sure to have enough space for ventilation when placing the product. An internal temperature rise
may cause fire and damage the product. Maintain enough space around the product as shown in the
diagram when installing the product.
― The exterior may differ depending on the product.
10 cm
10 cm
10 cm
10 cm
10 cm
Adjusting the Product Tilt and Height
― The colour and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
-15.0° (±3.0°) ~ 15.0° (±3.0°)
-2.0° (± 2.0°) ~ 11.0° (± 2.0°)
•
The product tilt and height can be adjusted.
•
Hold the top centre of the product and adjust the height carefully.
•
When adjusting the stand height, you may hear a noise. This noise is generated because the ball
inside the stand slides when the stand height is adjusted. It is a normal noise and not a product
malfunction.
•
When adjusting the left/right angles of the product, there may be a slight gap in the connection area
of the stand base. This is normal and does not indicate a malfunction of the product.
120.0 mm (±5.0 mm)
12
Advertisement
Table of Contents
