Table of Contents
Advertisement
Adjusting the Product Tilt and Height
― The colour and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
-15.0° (±3.0°) ~ 15.0° (±3.0°)
-2.0° (± 2.0°) ~ 11.0° (± 2.0°)
•
The product tilt and height can be adjusted.
•
Hold the top centre of the product and adjust the height carefully.
•
When adjusting the stand height, you may hear a noise. This noise is generated because of the
ball inside the stand slides when the stand height is adjusted. It is a normal noise and not a
malfunction of the product.
•
When adjusting the left/right angles of the product, there may be a slight gap in the connection
area of the stand base. This is normal and does not indicate a malfunction of the product.
120.0 mm (±5.0 mm)
Caution
•
Grasp the left and right sides of the monitor and adjust the swivel.
•
Grasp the centre of the monitor and adjust the height.
•
Do NOT hold the stand moving part with your hand when leveling the screen. Your hand may get
hurt.
•
Do not put an object around the lower part of the product. The product or object may get damaged
when adjusting the product height.
12
Advertisement
Table of Contents
