National Approvals - Siemens SIMATIC NET SCALANCE W M763-1 Series Reference Manual

Industrial wireless lan
Hide thumbs Also See for SIMATIC NET SCALANCE W M763-1 Series:
Table of Contents

Advertisement

be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
___________________________________________________________________________
Notice
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20 cm between the radiator and your body.
___________________________________________________________________________
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. Professional Installation Notice:
To comply with FCC part 15 rules in the United States, the system must be professionally
installed to ensure compliance with the Part 15 certification. It is the responsibility of the
operator and professional installer to ensure that only certified systems are deployed in the
United States. The use of the system in any other combination (such as co-located antennas
transmitting the same information) is expressly forbidden.
Note for Australia - RCM
The product meets the requirements of the RCM standard.
Applied standard:
• AS/NZS 4417.1 (Class A)
You will find the current versions of the standards in the currently valid RCM SDoCs (Self-
Declaration of Conformity).
Marking for the customs union
EAC (Eurasian Conformity)
Eurasian Economic Union of Russia, Belarus, Armenia, Kazakhstan and Kyrgyzstan
Declaration of conformity according to the technical regulations of the customs union (TR ZU)
2.6

National approvals

The following table lists the countries in which the SCALANCE WxM763-1 product is approved.
Depending on the antenna settings in use, a special regulation of the transmit power may be
required in some countires.
Approvals SCALANCE W700 802.11ax
Reference Manual, 04/2023, C79000-G8976-C621-05
SCALANCE WxM763-1
2.6 National approvals
47

Advertisement

Table of Contents
loading

Table of Contents