Advertisement
Contents
Connections
o Audio Device Settings (macOS only)
A With the unit power off, connect the unit and Mac using a USB cable
(sold separately).
For the connection procedure, refer to the "Connecting a PC or Mac"
0
section. (v p. 25)
B Press POWER X.
C Press USB-DAC to switch the input source to "USB-DAC".
D Move the cursor to "Go" on the computer screen, and then click
"Utilities".
The utility list is displayed.
0
E Double-click "Audio MIDI Setup".
The "Audio Devices" window is displayed.
0
F Secondary click on "DNP-2000NE", and then check that "Use This
Device For Sound Output" is checked.
If a different device is checked, select and secondary click on
0
"DNP-2000NE", and then select "Use This Device For Sound
Output".
Front panel
Rear panel
Playback
Settings
55
Remote control
unit
Tips
DNP-2000NE
DNP-2000NE
⑥
Index
Appendix
Advertisement
