Advertisement
Contents
Connections
Connecting a PC or Mac
By connecting a computer to the USB-DAC port on the rear panel of this unit using a commercially available USB connecting cable, this unit can be used
as a D/A converter. (v p. 48)
NOTE
0 Before USB connecting this unit to your computer, install the driver software in your computer. (v p. 48)
0 Download the driver software from the DNP-2000NE page of the Denon website.
0 Use a cable that is 3 m or less to connect to the computer.
Front panel
Rear panel
Playback
USB 2.0 cable
(not supplied)
Computer on which the driver software and
Type B
audio player software are installed
Remote control
unit
Settings
25
Index
Tips
Appendix
Advertisement
