Advertisement
Contents
Connections
I want to connect a power amplifier to this unit
A power amplifier can be connected to the analog audio output connectors (VARIABLE) on the rear panel. Set "Line Out Level" to "Variable" in the
0
menu and set the remote control operation mode of the volume buttons on the remote control to network audio player operation mode to adjust the
volume of the audio signal output from the analog audio output connectors (VARIABLE) using the remote control, TV remote control (HDMI control
function) and HEOS app. ("Line Out Level" (v p. 82), "Switching the function of the volume buttons on the remote control" (v p. 100))
I want the volume not to become too loud by mistake
Set the volume upper limit for "Volume Limit" in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.
0
(v p. 82)
I want to prevent this unit from going into standby by linking to the power off operation of an HDMI connected TV
Change the "HDMI Power Off Control" setting to "Off". (v p. 85)
0
Front panel
Rear panel
Playback
Settings
104
Remote control
unit
Tips
Index
Appendix
Advertisement
