Out Of Range; Connecting The Rf Remote Control; Cleaning And Maintenance; General Maintenance - Venduro Downdraft User Manual

Out of Range

If the RF remote control is out of range of the cooker hood, all the LEDs will briefly light
up in an upward sequence when you press a button�

Connecting the RF Remote Control

The RF remote control supplied is connected to the cooker
hood� If that is not the case, you can connect it by restar-
ting the cooker hood. Switch off the power to the cooker
hood for a minimum of 30 seconds and then switch it
on again� After restarting the cooker hood, you have 30
seconds to connect the RF remote control� Connect the
remote control by simultaneously pressing button A and D
for 2 seconds�
As soon as the RF remote control is connected, the ligh-
ting and the motor will start up�
It is possible to connect a maximum of 2 RF remote con-
trols (optional) to 1 cooker hood�

Cleaning and Maintenance

General Maintenance

The cooker hood will need cleaning after a certain period of time� A build-up of grease
within the cooker hood can catch fire and will also reduce the performance of the cooker
hood�

Stainless Steel

This can be cleaned with a stainless steel
cleaning product� Do not use any abrasive
or acidic products�

Lacquered Components

These can be cleaned using a mild cle-
aning product� Do not use any abrasive or
acidic products�

Handy Tip

You can keep the cooker hood system
clean by letting a cooking pan filled with
water, lemon juice and a glass of vine-
gar boil for approx� 20 minutes with the
cooker hood switched to position 2, and
by keeping the cooker hood running for
another 15 minutes after that�
Follow the same procedure for a plasma
system, and rinse the hydrosorb filter
in water with washing-up liquid� If this
is added separately to the grease filter
(black or yellow). The hydrosorb filter in
the grease filter can be cleaned in the
dishwasher�
ENG
43