Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nordic CWDC-120R
Summary of Contents for Nordic CWDC-120R
- Page 1 12V RATCHET WRENCH OPERATING MANUAL CWDC-120R...
- Page 2 NORDIC PRODUCT SPECIFICATION Voltage: No load speed: 0-300rpm reversible Motor: Brushed motor Chuck diameter: 3/8” Torque: Max. 40Nm A weighted sound pressure level: LpA: 80dB(A) ; KpA=3dB(A) A weighted sound power level: LwA: 91dB(A) ; KwA=3dB(A) Typical weighted vibration: ah=1164m/s2 ;...
- Page 3 NORDIC from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of an electric shock. • When operating a power tool outdoors, use an extension cable suitable for outdoor use. Using a cord suitable for outdoor use reduces the risk of an electric shock.
- Page 4 NORDIC • Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control. • Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work which needs to be done.
- Page 5 NORDIC • Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators and other polymer components may be damaged resulting in electrolyte leakage and/or internal short circuiting leading to heat generation causing rupture or file. Moreover do not dispose of the batteries in fire, explosion and/or intense burning may result.
- Page 6 NORDIC SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Read manual before use Wear eye protection Wear ear protection Wear safety gloves Wear respiratory protection In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated;...
- Page 7 NORDIC OPERATION BEFORE USE Remove any packing material and loose parts from unit. Check the accessories before use. It should be fit with the machine and your purpose, If the machine is new, the battery must first be charged. Attention! After long time storage the battery capacity will be reduce. Battery is housed in the handle, press the battery retention clips and remove battery from handle.
- Page 8 NORDIC ON/OFF TRIGGER • Use the On/Off trigger to start the machine and keep holding it for continuous operation. • The rotation speed can be varied by depressing the On/Off trigger. • The more the trigger is pressed, the faster the rotation speed.
Need help?
Do you have a question about the CWDC-120R and is the answer not in the manual?
Questions and answers