Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nordic MG-L0118
Summary of Contents for Nordic MG-L0118
- Page 1 18V CORDLESS ROTARY TOOL KIT OPERATING MANUAL MG-L0118...
-
Page 2: Product Specification
NORDIC PRODUCT SPECIFICATION Voltage: Charger Voltage: 100-240V/50-60Hz Rated Speed: 5,000-34,000rpm Collet: 1/8’ Universal GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. - Page 3 NORDIC • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.
-
Page 4: Additional Safety Instructions For Batteries And Chargers
NORDIC ensure that it meets the required safety standards. Special safety instructions for Rotary Tool • The device has been designed as a Rotary Tool. Read all warnings, instructions, drawings and specifications provided with this power tool. Failure to follow the instructions listed below may result in electric shock, fire and / or serious injury. - Page 5 NORDIC • Do not cause short circuits. If connection is made between the positive (+) and negative (-) terminal directly or via • Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators and other polymer components may be damaged resulting in electrolyte leakage and/or internal short circuiting leading to heat generation causing rupture or file.
- Page 6 NORDIC Wear ear protection Wear safety gloves Wear respiratory protection In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated; Earthing wire is therefore not necessary (only for charger) Ambient temperature 40°C max. (Only for battery)
-
Page 7: Product Accessories
NORDIC 6. PRODUCT ACCESSORIES • 40pcs accessories with storage case/ flexible driver with soft grip (1m length), 3.2mm Collet • 5pcs Cut off wheel • 10pcs Sanding paper • 3pcs Grinding wheel with shank:ø3.2mm • 2pcs Sanding shank:ø3.2mm • 6pcs Sanding band •... -
Page 8: Turning On/Off
NORDIC 8.2 OPERATION • Secure all work in a vise or clamp to a workbench to prevent it from moving under the tool. • Hold the tool in front and away from you, keeping the tool accessory clear of the workpiece. -
Page 9: Operating Modes
NORDIC • With the spindle lock engaged, loosen the collet nut with the provided wrench. • Remove the accessory. DANGER: if you are changing an accessory immediately after use, be careful not to touch the collet nut or the accessory with your hands or finders. You will get burned because of the heat build-up from cutting. -
Page 10: Cleaning And Maintenance
NORDIC 9. CLEANING AND MAINTENANCE 9.1 CLEANING • Keep the ventilation slots of the machine clean to prevent overheating of the engine. • Regularly clean the machine housing with a soft cloth, preferably after each use. • If the dirt does not come off use a soft cloth moistened with soapy water.
Need help?
Do you have a question about the MG-L0118 and is the answer not in the manual?
Questions and answers