Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nordic CMS-L0118
Summary of Contents for Nordic CMS-L0118
- Page 1 18V CORDLESS METAL SHEARS OPERATING MANUAL CMS-L0118...
-
Page 2: Product Specification
NORDIC PRODUCT SPECIFICATION Voltage: No Load Speed: 0-2500 SPM Max Cutting Speed: 3M /min GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. -
Page 3: Personal Safety
NORDIC • Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it will increase the risk of an electric shock. • Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts. -
Page 4: Additional Safety Warnings
NORDIC • Maintain power tools. Check for misalignment or jammed moving parts, breakages or any other feature that might affect the operation of the power tool. If it is damaged, the power tool must be repaired. Many accidents are caused by using poorly maintained power tools. -
Page 5: Additional Safety Instructions For Batteries And Chargers
NORDIC 14. Do not wear loose clothing or jewelry. Keep your hair clothing and gloves away from moving parts. 15. Always wear eye protection. 16. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence or alcohol or drugs. -
Page 6: Operation
NORDIC SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Read manual before use Wear eye protection Wear ear protection Wear safety gloves In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated;... -
Page 7: Charging The Battery
NORDIC Due to lithium-ion’s fade-free properties, the only time it is necessary to charge the lithium-ion battery pack is when the pack has reached the end of its charge. To signal the end of charge, power to the tool will drop quickly. -
Page 8: Cleaning And Maintenance
NORDIC CLEANING AND MAINTENANCE DANGER! Always pull out the mains power plug before starting any cleaning work. CLEANING Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
Need help?
Do you have a question about the CMS-L0118 and is the answer not in the manual?
Questions and answers