Advertisement
Monaco Installation Guide - Surface Profiles- vJUN16
Run a bead of silicone along the base of the floor profile and reposition it on the tray
8
where marked. Use the 10 mm spacer to ensure that it is aligned with the wall
profile, push the mitred ends together and tape in position.
Remove the 10mm spacer and apply a generous amount of silicone into the corner
joint inside the profiles. Reinsert the noted rubber strips into the floor profile.
The Majestic Shower Company Limited
Two North Place, Edinburgh Way, Harlow, Essex CM20 2SL England
Run a bead of silicone along each inside face of each profile as shown.
9
Then, using the suction glass lifters, place the glass panel in position.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
6
Advertisement
