MODENO OFE109 Manual page 11

ASSEMBLY INSTRUCTIONS
2
1. Place the tank seat（Sold Separately）on the ground and place a 20 lb.
propane tank into the tank seat.
2. Tighten down the screw on the side of the tank seat to secure the
propane tank.
1
3
Connecting the LP Gas Tank
Check to make sure there is no debris
in the head of the LP gas tank or in the
head of the regulator valve. Make sure you
check the burner and burner ports as well.
Connect gas line to tank by turning knob
clockwise. Hand tighten only.
A statement indicating that other cylinders may be acceptable for use with the appliance provided they
are compatible with the appliance retention means and accompanied by illustration(s) depicting the
cylinder mounted to the appliance utilizing the cylinder retention means and the point of contact between
the cylinder and the retention means.
Provided with a listed overfilling prevention device; and provided with a cylinder connection device
compatible with the connection for the appliance.
5
11/20
2
60"
Disconnecting the LP Gas Tank
Make sure the valve on the LP gas tank is
OFF.
Disconnect by turning the knob counter
clockwise until it is detached from the valve.