Mitsubishi Electric PUHZ-ZRP100VKA3 Service Manual page 110

OPERATING PROCEDURE
13. Removing the reactor (ACL) (Y model only)
(1) Remove the service panel. (See Photo 1)
(2) Loosen the clamp for the lead wire on separator.
(3) Disconnect the lead wires from the reactor (ACL).
(4) Remove the reactor box fixing screws (4 for right side/
4x10) to remove the reactor box.
(5) Remove 4 screws for reactor in the reactor box to remove
the reactor.
Note 1: Pay extra attention when handling the reactor
since it is very heavy (4.1 kg).
Note 2: The reactor can be easily removed by removing
the electrical parts box.
OCH645
PHOTOS
Photo 20
Reactor box
fixing screws
110
4-way valve
Reactor
Reactor fixing
screws