Table of Contents
Advertisement
2.0 Physical Installation
2.1 Overview
The CM2001 may be physically installed in two different ways. There are keyhole slots on the rear of the
case which may be used for mounting to a flat surface with screws. The other more typical way is to
attach the CM2001 to an AC1025 bracket with two machine screws (all available separately), for
mounting in an On-Q style enclosure. This method provides easy access to the hardware interface areas
on each end (see Figure 3).
AC1025
bracket
Figure 3
301 Fulling Mill Road, Suite G
3
Page
Middletown, PA 17057
(800)-321-2343
©Copyright 2013 by Legrand,
Inc All Rights Reserved.
www.legrand.us
Advertisement
Table of Contents
Need help?
Do you have a question about the CM2001 and is the answer not in the manual?