Advertisement
Head Disassembly
NOTE
Head Rebuilding should be performed in
a clean work area. Dust or dirt on O-rings
or other parts can scratch inner surfaces,
with subsequent leakage.
1. Using a small screwdriver or similar tool remove
2. Using a small screwdriver or similar tool remove
the Plug Seal. However do not damage the sealing
the PWT Seal from the groove in the end plug.
surface in any way as it may lead to leakage.
Removal of the Plug Seal
Removal of the PWT Seal
Head Component Identification - Head Disassembled
Page 7 of 9
Distributed by Applied Membranes, Inc. | www.appliedmembranes.com | (760) 727-3711 | USA
Advertisement
