H3C S5120-EI Series Irf Command Reference page 14

View
Any view
Default level
1: Monitor level
Parameters
verbose: Displays detailed information about the MAD detection. If this keyword is not provided, the
system displays brief information about the MAD detection.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display mad command to display information about multi-active detection (MAD).
Examples
# Display brief information about MAD.
<Sysname> display mad
MAD ARP disabled.
MAD LACP enabled.
# Display detailed information about MAD.
<Sysname> display mad verbose
Current MAD status: Detect
Excluded ports(configurable):
Vlan-interface999
Excluded ports(can not be configured):
MAD ARP enabled interface:
Vlan-interface2
MAD enabled aggregation port:
Bridge-Aggregation1
Table 5 display mad command output
Field
MAD LACP enabled
MAD ARP enabled.
Description
The enable status of LACP MAD. It can be enabled or disabled depending
on the configuration.
The enable status of ARP MAD. It can be enabled or disabled depending
on your configuration.
7