H3C S5120-EI Series Irf Command Reference page 11

View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display irf topology command to display topology information for the IRF virtual device.
Examples
# Display topology information for the IRF virtual device.
<Sysname> display irf topology
-------------------------------------------------------------------------
Switch
1
2
Table 3 display irf topology command output description
Field
Switch
IRF-Port 1
IRF-Port 2
Belong To
Link
neighbor
Topology Info
IRF-Port1
Link neighbor
DIS --
UP 1
Description
Member ID
Information about IRF–port 1, including its link state and neighbor (or remote
port).
Information about IRF-Port 2, including its link state and neighbor (or remote
port).
The IRF virtual device that the switch belongs to, represented by the bridge MAC
address of the master in the IRF virtual device.
Link state of the IRF port:
•
UP
•
DOWN
•
DIS—No physical port is bound to the IRF port.
The switch ID that connects to this IRF port.
If the IRF port does not connect to any switch, a hyphen (--) is displayed.
IRF-Port2
Link neighbor
UP 2
DIS --
4
Belong To
0023-8929-4f83
0023-8929-4f83