Brother QL820NWBC User Manual page 44

Printing Using the Mobile Device
 For Mac
a) Launch the Printer Setting Tool on your computer.
b) Click the [Wireless LAN] tab.
c) Confirm that [Wireless Direct] is set to [On].
b
For QL-810W
Press and hold the Wi-Fi ( ) Button on the printer for one second to turn the Wi-Fi function On. The Wi-Fi
( ) LED starts flashing blue once every three seconds.
For QL-820NWB
Press the Menu and ▼ Buttons to select the [WLAN] menu, and then press the OK Button.
Set [WLAN (On/Off)] to [On] to turn the Wi-Fi function On. The Wi-Fi ( ) icon appears on the LCD.
c
In the Wi-Fi settings screen of your mobile device, select the SSID of the printer and enter the password.
Note
• The factory default SSID and password are as follows:
SSID: "DIRECT-*****_QL-810W" or "DIRECT-*****_QL-820NWB" where ***** is the last five digits of the
product serial number.
(You can find the product serial number label in the DK Roll Compartment of the printer.)
The password: 810*****/820***** where ***** is the last five digits of the product serial number.
• You can connect the printer to a mobile device in the Infrastructure Mode via a wireless access
point/router.
3
34