Table of Contents
Advertisement
3130
Users Manual
6. Use the arrow keys to set the upper limit of the measurement range. Select DONE
7. Use the arrow keys to set lower limit of the measurement range, and select DONE
28
SET when finished. See Figure 32.
Figure 32. Setting the Upper Limit
SET when finished. The "%-ERROR" mode will be ready to use. See Figure 33.
Figure 33. % ERROR Screen
The lower and upper limit of the measuring range is saved in non-volatile memory
until they are changed by the user for the internal sensors and the external pressure
modules. See Figure 34.
Figure 34. Saved Upper and Lower Limits
hbb031.eps
hbb032.eps
hbb033.eps
Advertisement
Table of Contents
