Stanley FATMAX SFMEH230 Original Instructions Manual page 8

ENGLISH
WARNING! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Unplug the charger before cleaning it. Your charger does
u
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 10 A.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
Voltage V
Frequency
Hz
Power input W
Impact rate bpm
Impact energy (EPTA / Max)
J
Chisel positions
Tool holder
kg
Weight
8
(Original instructions)
SFMEH230 (Type 2)
900 - 1890
5 - 14.7 / 5 - 25
SDS Max
Level of sound pressure according to EN62841:
Sound pressure (L )
PA
Sound pressure uncertainty (K
Sound power (L )
WA
Sound power uncertainty (K
Vibration emission value ah (Chiselling):
(a )
h,CHeq
Uncertainty (K)
Declaration of conformity
The Supply of Machinery (Safety)
SFMEH230 Demolition Hammer
Stanley Fat Max declares that these products described under
EN62841-1:2015+A11:2022, EN IEC62841-2-6:2020
These products conform to the following UK Regulations:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
The Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001, S.I. 2001/1701 (as amended),
Intertek Testing & Certification Ltd, Academy Place, 1-9 Brook
Street, Brentwood, Essex, CM14 5NQ, United Kingdom
Approved Body Number: 0359 LWA (measured sound power
level) 102 dB(A), uncertainty (K) = 3,3 dB (A),
LWA (guaranteed sound power) 105 dB(A).
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Stanley Fat Max at the
following address or refer to
230
50
The undersigned is responsible for compilation of the techni-
1600
declaration on behalf of Stanley Fat Max.
12
Vice President Professional Power Tools EANZ GTS
10.5
)
PA
)
WA
Regulations 2008
"technical data" are in
compliance with:
+A11:2020.
2008/1597 (as amended).
Schedule 9.
2012/3032 (as amended).
the back of the manual.
cal file and makes this
STANLEY FATMAX
270 Bath Road, Slough, Berkshire, SL1 4DX
dB(A) 94
dB(A) 3
dB(A) 102
dB(A) 3.3
m/s 17.7
2
m/s 1.5
2
Karl Evans
England
30.12.2022