Arjo Sara Combilizer Quick Reference Manual
31292
Hide thumbs
Also See for Sara Combilizer:
- Quick reference manual (2 pages) ,
- Quick reference manual (2 pages) ,
- Instructions for use manual (80 pages)
Advertisement
Quick Links
QUICK REFERENCE GUIDE - USE
Sara Combilizer
From bed
1
D
Place Sara Combilizer in horizontal position. Fold down
shoulder supports (A).
Put armrests in horizontal position, levelled with mattress (B).
Remove pillow (C).
Fold away safety belts (D).
4
Position Sara Combilizer next to the bed.
Align patient's hip with the gap between
back support plate and seat plate.
2
A
C
B
Apply brakes on bed.
5
Do not raise
or lower other
equipment
Position Sara Combilizer 2 to 5 cm (1 to 2 inches) (A) lower than the bed.
Adjust foot support (B) to avoid hitting patient's feet during transfer.
08.KC.05EN_1 • 06/2020 • Page 1/6
3
Position one caregiver on each side of the bed.
Fold down bed rail on transfer side.
Place sliding aid under patient.
Place a pillow under patient's head.
6
A
B
Apply brakes on Sara Combilizer.
Continue with steps on next page
Advertisement
Related Manuals for Arjo Sara Combilizer
Summary of Contents for Arjo Sara Combilizer
- Page 1 Position Sara Combilizer next to the bed. Position Sara Combilizer 2 to 5 cm (1 to 2 inches) (A) lower than the bed. Apply brakes on Sara Combilizer. Align patient’s hip with the gap between Adjust foot support (B) to avoid hitting patient’s feet during transfer.
- Page 2 Keep eye on patient’s head and feet Position patient’s head. Align patient’s Transfer patient to the Sara Combilizer. Remove sliding aid. hip with the gap between back support Secure patient with chest, hip, knee and head safety belts. plate and seat plate.
- Page 3 Fold down shoulder support (B) on the bedside Apply brakes on Sara Combilizer. Adjust Sara Combilizer height to 5 cm (2 inches) above the bed (B). on Sara Combilizer. Lower Sara Combilizer on top of the bed for an even transfer (C).
- Page 4 Keep eye on patient’s head and feet Position one caregiver on the side of Sara Combilizer Release brakes and move Sara Remove the sliding aid from under patient. and one on the opposite side of the receiving bed. Combilizer away from the bed.
- Page 5 Fold down shoulder support and Carefully tilt Sara Combilizer remove armrests on transfer side. towards transfer side so patient’s Position Sara Combilizer in an Prepare and place the aid nearby. Detach all safety belts. feet can reach the floor. upright and lowest chair position.
- Page 6 Apply brakes on Sara Combilizer. upright and lowest chair position. on the transfer side. Move patient with the aid, close to Sara Combilizer. Rotate patient to a face forward Attach and adjust the required safety belts. Tilt Sara Combilizer to a Adjust Sara Combilizer to the patient’s sitting...
Need help?
Do you have a question about the Sara Combilizer and is the answer not in the manual?
Questions and answers