ACT 5e prox Operating & Installation Instructions Manual page 6

ACT 5e prox Operating and Installation Manual
Set Door Relay Time: Enter Programming Mode, then Press:
Step Keypad Entry
1 2
2 0
3 Press
Set Toggle Mode: Enter Programming Mode, then Press:
Step Keypad Entry
1 1
2 00-49
3 0 or 1
Deleting User's Card: Enter Programming Mode, then Press:
Step Keypad Entry
1 6
2 00-49
3 00-49
Deleting Card Number: Enter Programming Mode, then Press:
Step Keypad Entry
1 7
2 10 digit card
number
Check if User has no PIN Assigned: Enter Programming Mode, then Press:
Step Keypad Entry
1 80
2 00-49
Check if User has no Card Assigned
Step Keypad Entry
1 81
2 00-49
Programming ACT 5e prox Options: Enter Programming Mode, then Press:
Step Keypad Entry
1 30, 31,32,40 or 41
2 0 or 1
Operation
Set Door Relay Time – (default 5 seconds, maximum 255 seconds)
Buzzer sounds indicating timing... wait required period
End setting Door Relay Timer
Operation
Set Toggle Mode
Enter 2 digit User Number 00-49
0 = Relay Toggle, 1 = Relay Timed
Operation
Delete User's Card
First user to delete
Last user to delete
Operation
Delete card number
10-digit Card number with leading zeroes.
E.g. Card 54321, enter 0000054321
Operation
Check if user has no PIN already assigned
User 0-49
Keypad will flash the green led and sound high-pitched tone if the user has NO PIN code
assigned. It will flash red and sound low-pitched tone, if the user has a PIN code.
Operation
Check for user with no card assigned
User 0-49
Keypad will flash the green led and sound high-pitched tone if the user has NO card
assigned. It will flash red and sound low-pitched tone, if the user has a card.
Operation
2 digit option number
0=Off, 1= On
Example: Set user 12 to toggle
relay when access granted
1
12
0
Example: Set user 12 to toggle relay
when access granted
6
10
10
- 6 -
Rev 1.0
Set Toggle Mode
User 12
Relay Toggle
Delete cards
User 10
User 10