Table of Contents
Advertisement
How to Login via Browser
The AI smart features can be configured in a ZIP recorder or directly in the browser
interface of the camera (standalone)
Only one smart detection feature can be enabled at any given time.
See the NVR or DVR manual for information on configuring these features
with a ZIP recorder.
Follow the steps below for configuring the settings directly in the camera via a
browser for standalone setup.
You will need...
·
Windows Based PC/ Laptop connected to router/ PoE switch
·
ZipVision Pro App on Mobile Device
·
PoE Switch connected to Network/ Router
·
Ethernet network cable
·
ZipFinder
software, available via this link below:-
www.softcctv.com/store/Item/Zip-Finder-IP-CCTV-Security-Camera-Discovery-Tool
NOTE If the PC being used is on a different IP range to the PC then add the IP range
of the camera to the PC using the below guide:-
PDF Version :-
HTML Version :-
http://www.cctvmanuals.com/tips/How_to_add_an_IP_Range/index.html
1. Plug the camera's RJ45 port with a network cable into a PoE switch
© 2023 System Q Ltd
http://www.cctvmanuals.com/pdf/tips/How_to_add_an_IP_Range.pdf
ZipDVR.com
Index
7
Advertisement
Table of Contents
