Attachment Of The Touch Panel To The Plasma Display - Panasonic TY-TP42P8S Operating Instructions Manual

Attachment of the touch panel to the plasma display

Attach the mounting bracket. [A]
1
(1) Orientate the mounting bracket [A] so that the side lined
with cushion faces the touch panel.
(2) During attachment of the touch panel to the display, lift
the bracket to its highest point so that it does not strike
the display and tentatively fasten to the upper part of 2
points to the left and right.
Attach the mounting bracket. [B]
(1) Orientate the mounting bracket [B] so that the side lined
with tape faces the touch panel.
(2) During attachment of the touch panel to the display, lift
the bracket to its highest point so that it does not strike
the display and tentatively fasten to the upper part of 2
points to the left and right.
2
Attach the touch panel to the display front surface.
Be careful not to strike the touch panel on the display.
3
Attach the mounting bracket. [C]
Tentatively fasten a fixing screw in the left and right speaker mounting screw holes on the rear of the touch panel
and plasma display to attach the mounting bracket [C].
8
(TY-TP42P8-S)
(TY-TP50P8-S)
Attachment precautions
Never attach a plasma display onto the touch panel by placing the touch panel on
a flat surface. Doing so may damage the infrared sensor on the touch panel.
If you cause a malfunction by attempting attachment in this way, you will be charged
for repairs.
(For TY-TP50P8-S Only)
Attach mounting bracket [C]
Mounting
bracket
Mounting
[A] or [B]
Screw
[A]
Pad (Cushion)
Plasma Display
Stand
Touch Panel
Screw [C]
Touch panel
(Rear Side)
Mounting bracket [C]