Table of Contents
Advertisement
Setup program
The setup program is to set communication ports and various operation modes and to carry out calibration or so on.
Performing setup in the initial state saves the modified contents in "tpdrv.ini" setting file in "C:\Program Files\tpdrv"
folder. Those contents are still valid at the time of the next startup.
Pressing any button displays the setting window
relative to that item to permit changes in set values.
Changes to each item are reflected to the driver
software in operation when closing the window.
Pressing the [Close] button after completion of all
settings records all set values in "tpdrv.ini".
Cursor Position Fine Adjustment
As the result of carrying out calibration, the mouse
cursor appears at the touched position normally.
If the cursor position is off slightly for some reason,
use these buttons.
Adds a Setup Program short
cut onto the task bar.
Setup of a basic Mode
(see page 24)
Calibration Mode
Target is displayed in the order of upper
left, bottom left and upper right. And
calibration is completed.
Touch a target
(Press any key for cancellation.)
User Setting
(see page 32)
(see page 26)
23
Advertisement
Table of Contents
