Table of Contents
Advertisement
COM port number is confirmed with "Device Manager"
Installation of the USB Driver
"Driver Files Search Results" is indicated.
Click on this button.
6
Driver software is set up, and "Completing the Found New
Hardware Wizard" is indicated.
Click Finish to close this wizard.
7
It is recognized as new hardware once again, and the
8
screen on the left is displayed.
Click on [Start]
1
Double-click on "the system" icon of the control panel,
and open the properties of the system.
The properties of the system opens, click on the
2
"Hardware" tab. Then click on the "Device Manager"
button.
Double-click "Ports [COM&LPT]".
3
Confirm that "USB-Serial for Touch Panel V2 (COMx)"
is found in "Ports [COM&LPT]".
(COMx) is the COM port number for using a touch panel.
As for the COM port number, the setup number varies in
the use environment of the PC.
The setup of the USB driver is finished.
[Settings]
[Control Panel]
17
Advertisement
Table of Contents
