WE-EF RLS410 LED Installation And Maintenance Instructions Manual page 7

7) Connect leads of main supply cable G (and second cable H for
through wiring, if required) to respective terminals of socket K:
a) ON/OFF (L = Phase, N = Neutral,
= Earthing)
K H
8) Position luminaire housing B
connector D. Tighten two screws C gradually in alternating sequence
both on top and bottom until fully secured.
G
A and reconnect terminal
b) 1-10 V/DALI (L = Phase, N = Neutral,
= Earthing, DA/DA = DALI control line,
D–/D+ = 1-10 V control line).
K H
6
G