Fisher & Paykel HC36DTXB2N Manual page 17

Wall mounting
4
Remove the filters — pull the relative catch and tilt the
● ●
filter downwards until it disengages from the supports.
Hang the ventilation hood off the upper ventilation
● ●
hood mounting screws with 1/ 1 6" (2 mm) gap.
Hang off the keyhole attachment points on the back
of the ventilation hood then tighten the screws.
Attach the lower ventilation hood mounting screws
● ●
to fix the ventilation hood to the wall.
Refit the filters.
● ●
INSTALLATION INSTRUCTIONS
EN
15