Page 1
CPU-0500 Control Quick & Easy Start-Up Guide 2 Stage geothermal application with separate hot and cold tank Hot Tank Sensor Outdoor THM-0200 Sensor ROOM 76.0 °F TARGET 85°F Cold Tank Sensor To Ground Loops 3 Way Valve 2 Stage Heat Pump...
Page 2
Use Backup Temperature. eg. This setting is used to set the temperature at 20.0°F Diff and System/Setpoint 100.0°F. The which the CPU-0500 will go into CWSD. backup will come on at 80.0°F once the Below this temperature the system will not stage time has elapsed.
Need help?
Do you have a question about the CPU-0500 and is the answer not in the manual?
Questions and answers