Related Manuals for Erbauer ERB709BTE
Summary of Contents for Erbauer ERB709BTE
- Page 1 WARRANTY YEARS ERB709BTE Original Instructions SAFETY AND OPERATING MANUAL ERBAUER 315MM THICKNESSER ERB709BTE...
- Page 2 ERBAUER 315MM THICKNESSER ERB709BTE...
- Page 3 Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This product should give you reliable service but for your peace of mind this power tool does carries a 24-month guarantee, the terms of which are detailed below.
-
Page 4: General Safety Instructions
If the tool is provided for the connection of dust extraction and collecting equipment, ensure these are connected and properly used. 11. Do not abuse the cord. Never yank the tool to disconnect it from the socket. Keep the cord away from heat, oil and sharp edges. ERBAUER 315MM THICKNESSER ERB709BTE... - Page 5 22. Have your tools repaired by qualified person. This electrical tool complies with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user. ERBAUER 315MM THICKNESSER ERB709BTE...
-
Page 6: Health Advice
- When planing narrow pieces further precautions need to be taken to insure safe work, such as appliances for pushing the work piece from above and spring loaded protection. - Planes may not be used for folding, milling, making marks or pegs. ERBAUER 315MM THICKNESSER ERB709BTE... - Page 7 WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. ERBAUER 315MM THICKNESSER ERB709BTE...
- Page 8 4. Depth scale 12. Out-feed extension table 5. Carbon brush cap 13. Support outfeed roller 6. Cutter head adjustment handle 14. Mounting hole 7. Storage compartment 15. Dust extraction adapter 8. Overload switch 16. Carrying handle ERBAUER 315MM THICKNESSER ERB709BTE...
-
Page 9: Caracteristiques Techniques
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are necessary. IMPORTANT NOTE Remove the mains plug from socket before carrying out any adjustment or servicing. Ensure your mains supply voltage is the same as your tool rating plate voltage. ERBAUER 315MM THICKNESSER ERB709BTE... -
Page 10: Assembly Instruction
[24] x 01 [25] x 01 YOU WILL NEED (items not supplied) (items supplied) 14mm Open-end wrench 4mm, 5mm and 6mm Hex key (3pcs) or adjustment wrench Knife alignment gauge (1pc) Phillips screwdriver 8mm Open-end wrench (1pc) ERBAUER 315MM THICKNESSER ERB709BTE... - Page 11 - Attach the cutter head adjustment handle (6) to the thicknesser and fasten with a hexagon bolt M6 x 20 (19) and a spring washer 6 (20). - Tighten the hexagon bolt using 5mm hex key (23). ERBAUER 315MM THICKNESSER ERB709BTE...
- Page 12 WARNING! Dust extraction adapter must be fitted and the thicknesser must regularly check for dust build up and cleaned frequently, otherwise there is a risk of heat built up and potential fire. Fig. 4 Fig. 5 ERBAUER 315MM THICKNESSER ERB709BTE...
-
Page 13: Getting Started
- With the ON/OFF switch in the OFF position, lower the cutter head to about 25.4 mm from the table. Set the ON/OFF switch to the ON position. Allow the thicknesser to reach its full speed. ERBAUER 315MM THICKNESSER ERB709BTE... -
Page 14: Planing Tips
Damage to the workpiece and thicknesser can result. - The thicknesser works best if at least one side of the workpiece is flat. If both sides are rough, the ERBAUER 315MM THICKNESSER ERB709BTE... - Page 15 (2, 12) in order to support the workpiece: - Loosen the in-feed/out-feed roller knobs (10). - Pull the support infeed roller (1)/support outfeed roller (13) out to the desired length. ERBAUER 315MM THICKNESSER ERB709BTE...
- Page 16 IMPORTANT! Planing should be done in steps in order to achieve the final planing thickness. If the thickness is to be reduced by 6 mm, then 3 mm should be removed from each side. Measure the workpiece after every planing operation. ERBAUER 315MM THICKNESSER ERB709BTE...
-
Page 17: Maintenance
- Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloth to remove dirt, carbon dust, etc. ERBAUER 315MM THICKNESSER ERB709BTE... - Page 18 - Loosen the knife anchor screws by turning them in a clockwise direction. - Carefully remove the knife. Knife anchor screw Knife anchor Knife anchor screw Knife Cutter head side view Fig. 13 Fig. 12 ERBAUER 315MM THICKNESSER ERB709BTE...
- Page 19 If the knives are nicked, they must be replaced or reground. Knives can be reground several times, until they become 14mm wide. Have your knives reground by an experienced person. ERBAUER 315MM THICKNESSER ERB709BTE...
- Page 20 The wire, which is coloured green/ yellow, must be connected to the remaining terminal which is marked with an E or WARNING: Never connect live or neutral wires to the earth terminal of the plug. Only ERBAUER 315MM THICKNESSER ERB709BTE...
-
Page 21: Environmental Protection
ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. For further information visit www.recyclemore.co.uk. ERBAUER 315MM THICKNESSER ERB709BTE... -
Page 22: Troubleshooting
Rough, raised grain. 1. Dull knives. 1. Replace or sharpen knives. 2. Cut is too deep. 2. Reduce depth of cut. 3. Wood moisture is too high. 3. Use dry wood or wood with less moisture. ERBAUER 315MM THICKNESSER ERB709BTE... - Page 23 1. Have the indicator not match depth correctly. repaired by an authorized scale. service centre. Excessive dust in the 1. Leaking bag or loose vacuum 1. Check the dust chute air. connection (if any is used). connections. ERBAUER 315MM THICKNESSER ERB709BTE...
- Page 24 Declaration of Conformity We, Importer Erbauer (UK) LTD BA22 8RT Declare that the product ERBAUER 315MM THICKNESSER ERB709BTE Complies with the following Directives: Machine Directive 2006/42/EC EMC directive 2014/30/EU 2011/65/EU Restrictions of the use of certain hazardous substances in electrical and electronic equipment...
- Page 25 ERBAUER 315MM THICKNESSER ERB709BTE...
Need help?
Do you have a question about the ERB709BTE and is the answer not in the manual?
Questions and answers
gdzie jest serwis tygo typu urzadzenia
gdzie mozna kupic silnik do tej grubosciówki