Customizing The Radar Alert Settings With Your Edge 1040; The Varia Ertl615 And The Varia App; Pairing The Varia Ertl615 With Your Phone - Garmin Varia eRTL615 Owner's Manual

Light Mode Settings
From the Sensors menu, select Lights > Network Options > Light Mode.
Auto: Automatically adjusts the light intensity and light mode based on the ambient light and time of day.
High Visibility: Sets the light intensity to flash mode or the brightest setting available.
Trail: Automatically adjusts the light intensity and light mode based on the ambient light and time of day. This
mode is recommended for mountain biking.
Individual: Allows you to customize the light intensity and pattern mode for each light in your network
Network Settings, page 7).

Customizing the Radar Alert Settings with Your Edge 1040

Before you can customize the radar alert settings with your Edge 1040, you must pair the devices.
You can customize how the radar alerts sound and display on your Edge 1040.
1 From your Edge 1040, select
2 Select your Varia eRTL615.
3 Select Sensor Details > Alert Settings.
4 Select an option.
The Varia app connects to your Varia eRTL615 using Bluetooth
and settings.
• After pairing, the app displays a colored banner indicating the threat level posed by approaching vehicles.
• You can enable phone vibration alerts so you can monitor those alerts while your phone is in your pocket,
instead of mounted on the handlebar.
You can download the Varia app from the app store on your phone.

Pairing the Varia eRTL615 with Your Phone

The first time you connect the Varia eRTL615 to the Varia app on your phone, you must pair both devices. After
the initial pairing, the Varia app automatically connects to the Varia eRTL615 when you open the app and the
radar device is active and within range.
1 Bring your phone within range (0.5 m) of the Varia eRTL615.
NOTE: Stay 10 m away from other Bluetooth sensors while pairing.
2 On your compatible phone, enable Bluetooth technology.
3 From the app store on your phone, install and open the Varia app.
4 Select Pair Now.
5 While the Varia eRTL615 is turned off, hold the device button for 4 seconds to enter pairing mode.
The device status LED flashes purple, and the tail light turns on. The device is in pairing mode for 5 minutes
or until you hold the device button for 2 seconds to exit pairing mode.
6 Select That's Mine.
When the Varia eRTL615 is paired with your phone, the app displays the current radar status.
8
> Sensors.

The Varia eRTL615 and the Varia App

® technology. The app displays radar information
The Varia eRTL615 and the Varia App
(Light