Pairing the Varia Radar Device with Your Smartphone ....2 Viewing Radar on the Varia App ..........2 Customizing the Varia App Alert Settings ........3 The Varia RVR315 and Your Radar Display Unit ..3 Varia RDU Device Overview ............3 Installing the Varia RDU Device ..........3 Pairing the Radar Device with the RDU Device ......
Varia RVR315 Status LED are designed to accommodate most seat post angles. LED State Status • Mount the Varia RVR315 device on the seat post 250 mm to Flashing blue The device is in active pairing mode. The 1200 mm above the road.
Pairing the Varia Radar Device with Your Smartphone The first time you connect the Varia RVR315 device to the Varia app, you must pair both devices. After the initial pairing, the Varia app automatically connects to the Varia RVR315 when you open the app and the radar device is active and within range.
• Press the device key again to turn off tones. Place the rubber disk on the back of the bike mount. The rubber tabs align with the back of the bike mount so it stays in place. The Varia RVR315 and Your Radar Display Unit...
From the Sensors menu, select Add Sensor > Search All. Plug the large end of the USB cable into an AC adapter or a While the Varia RVR315 device is turned off, hold the device computer USB port. key for 1 second to enter active mode.
/express). • Check the USB cable, connectors, and ports for damage. This provides easy access to these services for Garmin devices: • Turn both devices off, and turn them back on. • Software updates • Make sure the device is within the approved operating •...
• Turn off Bluetooth technology from your smartphone settings, and turn it back on. • Turn both devices off, and turn them back on. The Varia RVR315 device sends radar data to the Varia app. The Varia app displays when connected.
Need help?
Do you have a question about the VARIA RVR315 and is the answer not in the manual?
Questions and answers